50 multiple-choice questions with answers and detailed explanations. Untimed — choose an answer to check it instantly.
0/50 answered0 correct
Question 1 of 50
A network administrator is troubleshooting a routing issue and needs to check which routes are known to a router. What command should be used to display the routing table on a Cisco router?
Correct answer: A) show ip route
Explanation: The show ip route command displays the routing table on a Cisco router.
Question 2 of 50
Which of the following describes the purpose of a DMZ in a network?
Correct answer: C) To create a buffer zone between the public Internet and the internal network
Explanation: A DMZ (demilitarized zone) is a buffer area that separates an organization's internal network from the public Internet.
Question 3 of 50
Which of the following is the maximum transmission unit (MTU) for a standard Ethernet frame?
Correct answer: A) 1500 bytes
Explanation: The maximum transmission unit (MTU) for a standard Ethernet frame is 1500 bytes, which refers to the payload size excluding headers.
Question 4 of 50
A network technician is setting up a new wireless network and wants to ensure it is encrypted. Which of the following encryption standards should be used to provide the strongest security?
Correct answer: C) WPA2
Explanation: WPA2 provides the strongest encryption for wireless networks using AES encryption.
Question 5 of 50
Which of the following is the default port used by DNS to resolve domain names to IP addresses?
Correct answer: A) 53
Explanation: DNS operates on port 53, which is used for both TCP and UDP traffic.
Question 6 of 50
What type of cabling is typically used for a cable television (CATV) connection?
Correct answer: C) Coaxial
Explanation: Coaxial cables are commonly used for cable television (CATV) connections and some broadband Internet connections.
Question 7 of 50
Which of the following is a valid IP address in the Class B private IP range?
Correct answer: B) 172.16.5.1
Explanation: The Class B private IP range is 172.16.0.0 to 172.31.255.255.
Question 8 of 50
A technician needs to use an IP addressing scheme that allows for subnetting and supernetting. Which of the following protocols supports this capability?
Correct answer: D) EIGRP
Explanation: EIGRP (Enhanced Interior Gateway Routing Protocol) supports subnetting and supernetting, allowing for more flexible IP addressing.
Question 9 of 50
Which of the following commands is used on a Windows system to display the IP configuration and network adapter details?
Correct answer: C) ipconfig
Explanation: The ipconfig command in Windows is used to display network adapter details, IP address, subnet mask, and default gateway.
Question 10 of 50
Which of the following DNS records is used to specify the mail servers responsible for receiving email for a domain?
Correct answer: B) MX
Explanation: The MX (Mail Exchange) record specifies the mail servers responsible for receiving email for a domain.
Question 11 of 50
A technician needs to install new wireless access points in a building with multiple floors. Which of the following antennas would provide the best coverage in this environment?
Correct answer: A) Omnidirectional
Explanation: Omnidirectional antennas provide 360-degree coverage and are ideal for environments like multi-floor buildings.
Question 12 of 50
What protocol is used by email clients to retrieve messages from a mail server?
Correct answer: B) POP3
Explanation: POP3 (Post Office Protocol 3) is used by email clients to retrieve messages from a mail server.
Question 13 of 50
A network administrator wants to create a secure method for remote users to connect to the internal network. Which of the following should the administrator implement?
Correct answer: C) VPN
Explanation: A VPN (Virtual Private Network) allows secure remote access to the internal network over the Internet.
Question 14 of 50
Which of the following devices separates broadcast domains in a network?
Correct answer: C) Router
Explanation: Routers separate broadcast domains, while switches and hubs operate within the same broadcast domain.
Question 15 of 50
A technician is configuring an 802.1Q trunk link between two switches. What is the purpose of this configuration?
Correct answer: B) To allow multiple VLANs to communicate over a single physical link
Explanation: 802.1Q is a VLAN trunking protocol that allows multiple VLANs to be carried over a single physical link.
Question 16 of 50
What is the default subnet mask for a Class C IP address?
Correct answer: C) 255.255.255.0
Explanation: The default subnet mask for a Class C IP address is 255.255.255.0, which allows for 256 addresses.
Question 17 of 50
Which of the following protocols uses port 22 to provide secure remote access to network devices?
Correct answer: C) SSH
Explanation: SSH (Secure Shell) uses port 22 to provide secure remote access to network devices.
Question 18 of 50
Which of the following commands is used to trace the route that packets take to reach a destination?
Correct answer: B) tracert
Explanation: The tracert command traces the route that packets take to reach a destination, showing each hop along the way.
Question 19 of 50
What is the purpose of NAT (Network Address Translation)?c
Correct answer: B) To map private IP addresses to public IP addresses for Internet communication
Explanation: NAT allows devices with private IP addresses to communicate with external networks by translating private IP addresses into public ones.
Question 20 of 50
A network administrator wants to restrict traffic between two VLANs. What type of device is required to implement this configuration?
Correct answer: C) Router
Explanation: Routers are used to route traffic between different VLANs.
Question 21 of 50
Which of the following protocols is used to monitor and manage network devices?
Correct answer: A) SNMP
Explanation: SNMP (Simple Network Management Protocol) is used to monitor and manage network devices.
Question 22 of 50
A technician is setting up a DHCP server. What is the primary function of a DHCP server?
Correct answer: A) Assign IP addresses to clients automatically
Explanation: DHCP (Dynamic Host Configuration Protocol) is used to automatically assign IP addresses to network devices.
Question 23 of 50
Which of the following commands is used to determine the MAC address of a network interface on a Windows machine?
Correct answer: A) ipconfig /all
Explanation: The ipconfig /all command shows detailed network information, including the MAC address of each network interface.
Question 24 of 50
Which of the following is used to transmit data in small, fixed-sized cells in a network, typically over high-speed links?
Correct answer: B) ATM
Explanation: ATM (Asynchronous Transfer Mode) uses small, fixed-sized cells to transmit data over high-speed links.
Question 25 of 50
What is the default port used by HTTPS for secure web traffic?
Correct answer: C) 443
Explanation: HTTPS (HyperText Transfer Protocol Secure) uses port 443 for secure web traffic.
Question 26 of 50
A technician needs to check for packet loss between two points on a network. Which command should the technician use?
Correct answer: A) ping
Explanation: The ping command sends ICMP packets and measures the response to detect packet loss and latency.
Question 27 of 50
A network administrator is implementing port security on a switch. What is the purpose of port security?
Correct answer: A) To prevent unauthorized devices from accessing the network
Explanation: Port security restricts access to specific MAC addresses on a switch port to prevent unauthorized devices from connecting.
Question 28 of 50
What is the purpose of a firewall in a network?
Correct answer: B) To filter and control incoming and outgoing network traffic
Explanation: A firewall monitors and filters incoming and outgoing traffic based on predefined security rules.
Question 29 of 50
A network administrator needs to configure a server that will store and provide access to large amounts of data. Which type of server should be used?
Correct answer: C) File server
Explanation: A file server is used to store and provide access to large amounts of data.
Question 30 of 50
Which of the following protocols operates at the Transport layer of the OSI model and provides reliable data delivery?
Correct answer: C) TCP
Explanation: TCP (Transmission Control Protocol) operates at the Transport layer and provides reliable, connection-oriented data delivery.
Question 31 of 50
Which of the following IPv6 address types is used to communicate with all nodes on a network segment?
Correct answer: B) Multicast
Explanation: IPv6 does not use broadcasts. Multicast addresses are used to send packets to multiple nodes in a group.
Question 32 of 50
Which of the following protocols is used to securely access a remote computer’s desktop over a network?
Correct answer: C) RDP
Explanation: RDP (Remote Desktop Protocol) is used to securely access a remote computer's desktop over a network.
Question 33 of 50
A technician is troubleshooting an IP address conflict on a network. Which of the following tools can be used to identify the MAC address associated with an IP address?
Correct answer: C) arp
Explanation: The arp command is used to map IP addresses to MAC addresses.
Question 34 of 50
Which of the following standards defines Power over Ethernet (PoE), allowing network cables to carry electrical power?
Correct answer: C) 802.3af
Explanation: The 802.3af standard defines Power over Ethernet (PoE), which allows network cables to carry electrical power.
Question 35 of 50
A network technician needs to prevent loops in a network with redundant links between switches. Which protocol should be enabled on the switches?
Correct answer: B) STP
Explanation: STP (Spanning Tree Protocol) prevents loops in a network with redundant links by logically blocking some paths.
Question 36 of 50
Which of the following commands is used to display the routing table on a Linux system?
Correct answer: A) route
Explanation: The route command is used to display and manipulate the IP routing table on a Linux system.
Question 37 of 50
A network administrator needs to configure a VLAN on a switch. What is the purpose of VLANs in a network?
Correct answer: A) To separate network traffic into different segments
Explanation: VLANs (Virtual Local Area Networks) separate network traffic into different segments, improving security and performance.
Question 38 of 50
A user is trying to access a website but is receiving a “Page not found” error. The network is functioning, and the IP address is correct. What might be causing the problem?
Correct answer: B) DNS resolution failure
Explanation: A "Page not found" error can be caused by a DNS resolution failure, where the domain name cannot be translated to an IP address.
Question 39 of 50
A technician is installing new fiber optic cabling for a high-speed network connection. What is an advantage of using fiber optic cables over copper cables?
Correct answer: B) Pareto chart
Explanation: Fiber optic cables experience less attenuation over long distances and are immune to electromagnetic interference.
Question 40 of 50
Which of the following protocols is used to synchronize time between devices on a network?
Correct answer: A) NTP
Explanation: NTP (Network Time Protocol) is used to synchronize time between devices on a network.
Question 41 of 50
A network technician is troubleshooting an issue where a workstation is not receiving an IP address from the DHCP server. What could be a possible cause?
Correct answer: C) DHCP server unavailable
Explanation: If the DHCP server is unavailable, the workstation will not receive an IP address automatically.
Question 42 of 50
Which of the following routing protocols is considered a distance-vector protocol?
Correct answer: C) RIP
Explanation: RIP (Routing Information Protocol) is a distance-vector routing protocol that determines the best path based on hop count.
Question 43 of 50
A technician needs to configure a secure method for transferring large files between two remote servers. Which of the following protocols should be used?
Correct answer: C) SFTP
Explanation: SFTP (SSH File Transfer Protocol) provides secure file transfer between two remote servers using encryption.
Question 44 of 50
What is the purpose of a proxy server in a network?
Correct answer: C) To act as an intermediary between client devices and external services
Explanation: A proxy server acts as an intermediary between client devices and external services, often used to improve security or performance.
Question 45 of 50
Which of the following ports is used by the Telnet protocol?
Correct answer: B) 23
Explanation: Telnet operates on port 23 and is used for remote access to devices over a network, although it is not secure.
Question 46 of 50
A technician is configuring a router to block traffic from a specific IP address. Which of the following should be configured to implement this restriction?
Correct answer: B) ACL
Explanation: Access Control Lists (ACLs) are used to allow or block specific traffic based on IP addresses, protocols, or ports.
Question 47 of 50
A network administrator is setting up a wireless network and needs to ensure that only authorized users can access it. Which of the following security measures should be implemented?
Correct answer: A) MAC address filtering
Explanation: MAC address filtering restricts access to the wireless network by allowing only authorized devices with specific MAC addresses to connect.
Question 48 of 50
Which of the following protocols is used for automated discovery of devices on a network?
Correct answer: B) LLDP
Explanation: LLDP (Link Layer Discovery Protocol) is used for the automated discovery of devices on a network.
Question 49 of 50
What is the primary function of a load balancer in a network?
Correct answer: B) To distribute network traffic across multiple servers
Explanation: A load balancer distributes network traffic across multiple servers to ensure availability and improve performance.
Question 50 of 50
A network administrator is configuring a switch to assign IP addresses to clients dynamically. What feature must be enabled on the switch?
Correct answer: B) DHCP
Explanation: DHCP (Dynamic Host Configuration Protocol) assigns IP addresses dynamically to clients on a network.
Set 3 complete
You scored 0%
0 correct out of 0 answered (50 questions in this set).