50 multiple-choice questions with answers and detailed explanations. Untimed — choose an answer to check it instantly.
0/50 answered0 correct
Question 1 of 50
A network architect analyzes the software-defined networking model and reviews the layer that applies the business logic to decide how to prioritize traffic, secure data, and where to switch data. What is the appropriate layer for this description?
Correct answer: A) Application layer
Explanation: The Application layer in SDN (Software Defined Networking) applies business logic and decides how to prioritize, secure, and switch traffic.
Question 2 of 50
When configuring connectivity with a virtual switch that bridges the virtual and physical networks via the host computer’s physical NIC, a network engineer creates a virtual switch that binds to the host’s NIC to allow the VM to communicate on the physical network. What switch did the network engineer create?
Correct answer: B) External
Explanation: An external virtual switch binds to the host's physical NIC to enable virtual machines to communicate with the physical network.
Question 3 of 50
While looking for a cloud deployment model for business operations, the network specialist looks for a model that a third party hosts for the organization’s exclusive use. Which cloud deployment model meets the network specialist’s and businesses’ needs?
Correct answer: D) Hosted Private
Explanation: A hosted private cloud is managed by a third party but is exclusively for a single organization's use.
Question 4 of 50Select all that apply
A network consultant is considering what technologies to use when adding a storage area network (SAN). What are the two most popular SAN connection types? (Select all that apply.)
Correct answers: A) Fibre Channel B) iSCSI
Explanation: Fibre Channel and iSCSI are the two most commonly used technologies for SAN connections.
Question 5 of 50
While looking for a cloud service model for business, the network specialist looks for a model that allows the organization to rent components and internet links on an as-needed basis from the service provider’s data center. Which cloud service model meets the network specialist’s and businesses’ needs?
Correct answer: C) Infrastructure as a Service
Explanation: Infrastructure as a Service (IaaS) allows businesses to rent computing infrastructure, including network links and components, as needed.
Question 6 of 50
You are configuring a point-to-point link between two routers and have been assigned an IP of 77.81.12.14/30. What is the network ID associated with this IP assignment?
Correct answer: B) 77.81.12.12
Explanation: A /30 subnet mask gives a block size of 4, and the network ID for this range would be 77.81.12.12.
Question 7 of 50
What is the network ID associated with the host located at 192.168.0.123/29?
Correct answer: A) 192.168.0.120
Explanation: With a /29 subnet mask, the network ID for this host would be 192.168.0.120.
Question 8 of 50
Rick is configuring a Windows computer to act as a jump box on his network. He implements static routing to control the networks and systems the jump box communicates with. Which of the following commands did he use to configure this on the Windows machine?
Correct answer: A) route
Explanation: The "route" command is used to configure static routes on a Windows computer.
Question 9 of 50
You are trying to select the BEST network topology for a new network based on the following requirements. The design must include redundancy using a minimum of two cables to create the network. The network should not be prone to congestion, therefore each device must wait for its turn to communicate on the network by passing around a token. Which of the following topologies would BEST meet the client’s requirements?
Correct answer: B) Ring
Explanation: In a ring topology, redundancy is built into the design, and the token-passing mechanism ensures that devices communicate without congestion.
Question 10 of 50
An additional network segment is urgently needed for QA testing on the external network. A software release could be impacted if this change is not immediate. The request comes directly from management and was just approved through the emergency change management process. Which of the following should the technician do?
Correct answer: A) Make the change, document the requester, and document all network changes
Explanation: In an emergency change management process, the technician should proceed with the change and ensure that all documentation is completed.
Question 11 of 50
When a criminal or government investigation is underway, what describes the identification, recovery, or exchange of electronic information relevant to that investigation?
Correct answer: B) eDiscovery
Explanation: eDiscovery is the process of identifying, recovering, and exchanging electronic information for legal investigations.
Question 12 of 50
Your company wants to create highly available data centers. Which of the following will allow the company to continue maintaining an Internet presence at all sites if the WAN connection at their own site goes down?
Correct answer: B) BGP
Explanation: BGP (Border Gateway Protocol) allows for highly available networks, enabling a site to maintain an Internet presence even if the WAN connection fails.
Question 13 of 50
A system administrator wants to verify that external IP addresses cannot collect software versioning from servers on the network. Which of the following should the system administrator do to confirm the network is protected?
Correct answer: C) Analyze packet captures
Explanation: Analyzing packet captures will allow the administrator to see what information is being sent out and confirm if software versioning is exposed.
Question 14 of 50
You are working as a network administrator and are worried about the possibility of an insider threat. You want to enable a security feature that would remember the Layer 2 address first connected to a particular switch port to prevent someone from unplugging a workstation from the switch port and connecting their laptop to that same switch port. Which of the following security features would BEST accomplish this goal?
Correct answer: B) Port security
Explanation: Port security can remember the first MAC address connected to a switch port and prevent unauthorized devices from accessing it.
Question 15 of 50
Scott is a brand new network technician at Dion Training. He has been told to remote into the edge switch from his desk and enable DHCP snooping. Which of the following commands should he use?
Correct answer: C) Telnet
Explanation: Telnet is a protocol that allows remote access to network devices, though it is not as secure as SSH.
Question 16 of 50
You are installing a new LAN in a building your company just purchased. The building is older, but your company has decided to install a brand-new Cat 6a network in it before moving in. You are trying to determine whether to purchase plenum or PVC cabling. Which environmental conditions should be considered before making the purchase?
Correct answer: B) Air duct placement
Explanation: Plenum cabling is used in areas where air circulates, such as air ducts, due to its fire-resistant properties.
Question 17 of 50Select all that apply
Tamera just purchased a Wi-Fi-enabled Nest Thermostat for her home. She has hired you to install it, but she is worried about a hacker breaking into the thermostat since it is an IoT device. Which of the following is the BEST thing to do to mitigate Tamera’s security concerns? (Select the best two.)
Correct answers: A) Configure the thermostat to connect to the wireless network using WPA2 encryption and a long, strong password B) Configure the thermostat to use a segregated part of the network by installing it into a screened subnet
Explanation: Using strong encryption and a segregated network ensures that the device is better protected from hackers.
Question 18 of 50
Andy is a network technician who is preparing to configure a company’s network. He has installed a firewall to segment his network into an internal network, a DMZ or screen subnet, and an external network. No hosts on the internal network should be directly accessible by their IP address from the Internet, but they should be able to reach remote networks if they have been assigned an IP address within the network. Which of the following IP addressing solutions would work for this particular network configuration?
Correct answer: A) NAT
Explanation: NAT (Network Address Translation) allows internal hosts to access external networks without exposing their private IP addresses
Question 19 of 50
What is the lowest layer (bottom layer) of a bare-metal virtualization environment?
Correct answer: D) Physical hardware
Explanation: In a bare-metal virtualization environment, the physical hardware is the lowest layer, on top of which the hypervisor runs.
Question 20 of 50Select all that apply
Which of the following technologies could be used to ensure that users who log in to a network are physically in the same building as the network they are attempting to authenticate on? (Select the best two.)
Correct answers: A) GPS location B) NAC
Explanation: GPS location can verify a user's physical location, while NAC (Network Access Control) can ensure compliance with network policies.
Question 21 of 50
A company is expanding its network and needs to ensure that only authorized devices can connect to its wireless network. Which of the following would best meet this requirement?
Correct answer: A) WPA2-PSK
Explanation: WPA2-PSK provides secure encryption and ensures that only authorized users with the correct pre-shared key can access the network.
Question 22 of 50
A network technician is troubleshooting an issue where users cannot access certain external websites. Upon investigation, the technician discovers that all requests to these websites are being blocked. What is the most likely cause of this issue?
Correct answer: B) Firewall rules
Explanation: Firewall rules can block specific websites or IP ranges, preventing access to those sites from within the network.
Question 23 of 50
Which of the following protocols is responsible for resolving IP addresses to MAC addresses?
Correct answer: A) ARP
Explanation: ARP (Address Resolution Protocol) is used to map IP addresses to MAC addresses in a local area network.
Question 24 of 50
What type of cabling should a network technician install to ensure the network is protected from electromagnetic interference (EMI) in an industrial environment?
Correct answer: D) Fiber optic
Explanation: Fiber optic cabling is immune to electromagnetic interference, making it ideal for environments with high EMI.
Question 25 of 50
Which of the following is a characteristic of a stateful firewall?
Correct answer: A) Tracks the state of network connections
Explanation: Stateful firewalls track the state of active connections and make decisions based on the context of the traffic.
Question 26 of 50
A technician needs to install a new VoIP phone system in a company. Which of the following network services should be configured to ensure voice traffic is prioritized?
Correct answer: C) QoS
Explanation: Quality of Service (QoS) is used to prioritize certain types of traffic, such as voice, over other types to ensure reliable communication.
Question 27 of 50
What is the primary purpose of VLANs in a network?
Correct answer: B) Segment a network for security and traffic management
Explanation: VLANs are used to logically segment a network to improve security and manage network traffic more effectively.
Question 28 of 50
Which of the following ports is used by HTTPS?
Correct answer: C) 443
Explanation: HTTPS uses TCP port 443 for secure web traffic.
Question 29 of 50
A network administrator wants to prevent unauthorized devices from accessing the network by requiring authentication for devices connected to a switch. Which protocol should the administrator use?
Correct answer: C) 802.1X
Explanation: 802.1X is used for port-based authentication, ensuring that only authorized devices can access the network.
Question 30 of 50
Which command can be used on a Windows machine to release and renew the DHCP lease?
Correct answer: D) ipconfig
Explanation: The ipconfig command in Windows is used to release and renew DHCP leases, along with displaying network configuration.
Question 31 of 50
Which of the following technologies allows for the tunneling of IPv6 traffic over an IPv4 network?
Correct answer: C) 6to4
Explanation: 6to4 is a tunneling method that allows IPv6 traffic to be transmitted over an IPv4 network.
Question 32 of 50
A network administrator needs to assign IP addresses to several new devices on a network but does not want to assign them manually. What service should the administrator configure?
Correct answer: C) DHCP
Explanation: DHCP automatically assigns IP addresses to devices on a network.
Question 33 of 50
Which of the following is used to prevent loops in a network?
Correct answer: C) STP
Explanation: Spanning Tree Protocol (STP) is used to prevent loops in Ethernet networks by disabling redundant links.
Question 34 of 50
Which type of cable is commonly used for high-speed data transmission over short distances in a data center environment?
Correct answer: D) Fiber optic
Explanation: Fiber optic cables are often used for high-speed data transmission in data centers due to their high bandwidth and resistance to interference.
Question 35 of 50
Which of the following IP address ranges is reserved for documentation and example purposes?
Correct answer: B) 198.51.100.0/24
Explanation: The range 198.51.100.0/24 is reserved for documentation and examples, as specified by RFC 5737.
Question 36 of 50
A company is setting up a wireless network that must support high data rates and operate on the 5 GHz band. Which of the following wireless standards should the company implement?
Correct answer: D) 802.11ac
Explanation: 802.11ac operates on the 5 GHz band and supports higher data rates compared to older wireless standards.
Question 37 of 50
Which of the following routing protocols is a distance-vector protocol and uses hop count as its primary metric?
Correct answer: C) RIP
Explanation: RIP (Routing Information Protocol) is a distance-vector protocol that uses hop count to determine the best route.
Question 38 of 50
Which protocol is responsible for converting a public IP address into a private IP address when communicating with external networks?
Correct answer: C) NAT
Explanation: NAT (Network Address Translation) is responsible for converting private IP addresses into public IP addresses for communication with external networks.
Question 39 of 50
Which command is used to display the routing table on a Linux machine?
Correct answer: D) route
Explanation: The route command is used to display or modify the routing table on a Linux machine.
Question 40 of 50
What is the maximum size of a standard Ethernet frame, excluding the preamble?
Correct answer: B) 1518 bytes
Explanation: The maximum size of a standard Ethernet frame, excluding the preamble, is 1518 bytes, which includes the Ethernet header and trailer.
Question 41 of 50
Which of the following ports is used for FTP control traffic?
Correct answer: B) 21
Explanation: FTP control traffic uses TCP port 21 for establishing and managing the connection.
Question 42 of 50
Which of the following network devices operates at Layer 2 of the OSI model and uses MAC addresses to forward data?
Correct answer: B) Switch
Explanation: A switch operates at Layer 2 (Data Link Layer) and uses MAC addresses to forward data to the correct destination.
Question 43 of 50
Which of the following is a primary function of a proxy server?
Correct answer: B) Cache web content
Explanation: A proxy server caches web content to reduce bandwidth usage and improve access speed to frequently visited websites.
Question 44 of 50
What type of IP address is 169.254.10.23?
Correct answer: D) APIPA
Explanation: An IP address in the 169.254.x.x range is automatically assigned by a device when it cannot obtain an IP address from a DHCP server. This is known as APIPA (Automatic Private IP Addressing).
Question 45 of 50
A company requires that all workstations on the network have the same IP address each time they connect to the network. Which of the following options should the network administrator configure?
Correct answer: C) DHCP reservations
Explanation: DHCP reservations allow the same IP address to be assigned to a device each time it connects to the network.
Question 46 of 50
Which of the following is a default routing protocol used by routers on the Internet to exchange routing information between different networks?
Correct answer: D) BGP
Explanation: Border Gateway Protocol (BGP) is the default protocol used by routers to exchange routing information across the Internet.
Question 47 of 50
Which of the following DNS records is used to map a domain name to an IPv6 address?
Correct answer: B) AAAA
Explanation: AAAA (Quad-A) records are used in DNS to map domain names to IPv6 addresses.
Question 48 of 50
A network administrator is setting up a virtual private network (VPN) to allow remote employees to securely access the company’s internal resources. Which of the following protocols should the administrator use for this purpose?
Correct answer: B) IPSec
Explanation: IPSec is commonly used to create secure VPN connections by encrypting data between the remote user and the internal network.
Question 49 of 50
What command can be used on a Linux machine to test network connectivity and determine the amount of time it takes to reach a destination?
Correct answer: A) ping
Explanation: The ping command sends ICMP Echo Requests to test network connectivity and measure round-trip time.
Question 50 of 50
Which of the following protocols is used to securely transfer files over a network and operates over port 22?
Correct answer: C) SFTP
Explanation: SFTP (SSH File Transfer Protocol) is used to securely transfer files over a network and operates over TCP port 22.
Set 2 complete
You scored 0%
0 correct out of 0 answered (50 questions in this set).