50 multiple-choice questions with answers and detailed explanations. Untimed — choose an answer to check it instantly.
0/50 answered0 correct
Question 1 of 50
A technician researching fiber optic cables needs to know which component reflects signals back into the waveguide, enabling light to travel through the cable. What component provides this reflection?
Correct answer: B) Cladding
Explanation: Cladding is designed to reflect light back into the core of the fiber, allowing the signal to travel efficiently through the waveguide.
Question 2 of 50
A technician troubleshooting a workstation on a 100BASE-TX network finds that Workstation01 cannot ping the file server DIONTRAININGFS01, but Workstation02 can. What is the MOST likely cause?
Correct answer: B) Workstation01 is on a different subnet
Explanation: The fact that Workstation01 receives a "destination host unreachable" error indicates a potential subnet issue. Since Workstation02 can ping the server, Workstation01 may be misconfigured on a different subnet.
Question 3 of 50
An application developer is troubleshooting ASCII conversion issues. At which layer of the OSI model should they focus?
Correct answer: B) Presentation
Explanation: The Presentation layer is responsible for data translation and encoding, including ASCII conversions.
Question 4 of 50
A systems administrator is concerned with ensuring appropriate port assignments for network applications. Which OSI model layer should they review?
Correct answer: B) Transport
Explanation: The Transport layer manages port numbers and is responsible for end-to-end communication.
Question 5 of 50
A network engineer is looking for the tightest fiber optic connection with the best return loss performance for a project. Which connector should they choose?
Correct answer: C) APC
Explanation: The Angled Physical Contact (APC) connector provides the tightest connection and the best return loss performance in fiber optic connections.
Question 6 of 50
Which of the following is NOT true about Gigabit Ethernet?
Correct answer: D) Specified as 100BASE-T
Explanation: Gigabit Ethernet is specified as 1000BASE-T, not 100BASE-T, which is for Fast Ethernet (100 Mbps).
Question 7 of 50
Which type of fiber optic connector features a push-pull mechanism commonly used with multimode fiber?
Correct answer: A) Subscriber Connector (SC)
Explanation: SC connectors are widely used with multimode fiber and feature a push-pull mechanism.
Question 8 of 50
What tool should be used to create patch cords for a new cabling infrastructure project?
Correct answer: B) Crimper/Cable stripper
Explanation: Crimpers and cable strippers are used to create and prepare patch cords for installation.
Question 9 of 50
What multiplexing technique can multiplex up to 16 wavelengths on an SFP/SFP+ interface?
Correct answer: B) Coarse Wavelength Division Multiplexing (CWDM)
Explanation: CWDM is a cost-effective method that supports multiplexing multiple wavelengths (up to 16) on a single fiber.
Question 10 of 50
A network technician needs connectors for coax cables. What type of connector should they order?
Correct answer: B) F-type
Explanation: F-type connectors are commonly used for terminating coaxial cables.
Question 11 of 50
Which IEEE standard implements functions for the physical and data link layers of the OSI model?
Correct answer: C) 802.3
Explanation: The 802.3 standard is responsible for Ethernet and functions of the physical and data link layers.
Question 12 of 50
A consultant is replacing STP cabling for a company. Which type of STP cabling is most difficult to install?
Correct answer: C) Legacy STP
Explanation: Legacy STP cables are more difficult to install due to their older design and shielding requirement
Question 13 of 50
Which type of fiber optic cable should be used to transmit data over the maximum distance between buildings?
Correct answer: B) SMF
Explanation: Single-mode fiber (SMF) is designed for long-distance data transmission.
Question 14 of 50
A network technician in Germany is installing Cat 7 cabling. Which two types of connectors should be used to comply with standards?
Correct answer: B) TERA and GG45
Explanation: TERA and GG45 are the recommended connectors for Cat 7 installations, especially in Europe.
Question 15 of 50
What should a server administrator configure to prevent overwhelming a switch’s buffer and dropping frames?
Correct answer: A) Flow control
Explanation: Flow control helps prevent buffer overload by temporarily pausing traffic.
Question 16 of 50
In normal conditions, what is the maximum size of a standard Ethernet frame, excluding the preamble?
Correct answer: B) 1518 bytes
Explanation: The maximum size of a standard Ethernet frame, excluding the preamble, is 1518 bytes.
Question 17 of 50
Which two parts of the Ethernet frame are part of the CSMA/CD protocol and help detect collisions early?
Correct answer: B) Preamble and SFD
Explanation: The Preamble and Start Frame Delimiter (SFD) are used in CSMA/CD to detect collisions early in Ethernet frames.
Question 18 of 50
What should a systems administrator configure to combine multiple 1 Gbps connections into a 2 Gbps connection?
Correct answer: B) NIC teaming
Explanation: NIC teaming allows multiple network interfaces to be combined, effectively increasing the bandwidth.
Question 19 of 50
Which network feature is commonly supported by standard NICs?
Correct answer: B) Gigabit Ethernet
Explanation: Most standard NICs support Gigabit Ethernet (1000 Mbps).
Question 20 of 50
A switch cannot establish a connection with another switch. What is the most likely cause?
Correct answer: A) MDI-X to MDI-X connected ports
Explanation: MDI-X ports are typically used to connect end devices. When connecting two switches, one of the ports must be in MDI mode, or an appropriate crossover cable must be used.
Question 21 of 50
Which feature on a switch should a project manager use to allow switches to operate as a group?
Correct answer: B) Stackable
Explanation: Stackable switches can be grouped together to function as a single unit.
Question 22 of 50
Which tool should a network operator use to troubleshoot kinks and imperfections in network cabling?
Correct answer: C) TDR
Explanation: A Time-Domain Reflectometer (TDR) is used to find imperfections such as kinks in cables by analyzing signal reflections.
Question 23 of 50
What protocol should be filtered to investigate a CAM table flooded by an attacker?
Correct answer: B) ARP
Explanation: A CAM table flooding attack often involves ARP traffic, so filtering ARP protocol will help identify related malicious activity.
Question 24 of 50
What is the typical use of the IP range 0.0.0.0/8?
Correct answer: D) Source address by a client seeking a DHCP lease
Explanation: IP range 0.0.0.0/8 is typically used by clients seeking a DHCP lease when they do not yet have an assigned IP.a) Multicasting b) Loopback address c) Reserved for documentation
Question 25 of 50
What does the “ipconfig” command do without any switches?
Correct answer: D) Displays the IP address, subnet mask, and default gateway
Explanation: The "ipconfig" command without switches displays the IP address, subnet mask, and default gateway for all network interfaces.
Question 26 of 50
Which command forces a DHCP client to renew its IP lease?
Correct answer: A) ipconfig /renew
Explanation: The "ipconfig /renew" command forces a DHCP client to renew its IP address lease from the DHCP server.
Question 27 of 50
Which command shows the ARP cache contents in Windows?
Correct answer: C) arp -a
Explanation: The "arp -a" command displays the ARP cache contents in Windows.
Question 28 of 50
What network issue is most likely causing a network slowdown and significant increase in bandwidth usage, as indicated by high IGMP message counters on switch ports?
Correct answer: B) Multicast transmissions
Explanation: High counts of IGMP messages indicate multicast traffic, which can increase bandwidth consumption if not managed properly.
Question 29 of 50
What is NOT part of an IPv6 unicast address?
Correct answer: B) Starts with fe80::
Explanation: IPv6 unicast addresses that start with fe80:: are link-local addresses and are not considered global unicast addresses.
Question 30 of 50
A sysadmin troubleshooting a connectivity issue suspects a disabled IP. What is the likely cause
Correct answer: B) Duplicate IPs
Explanation: Duplicate IPs often cause connectivity issues, as multiple devices attempt to use the same IP on the network.
Question 31 of 50
What IPv6 header field is responsible for quality of service?
Correct answer: B) Flow Label
Explanation: The Flow Label field in the IPv6 header is used to prioritize packets for quality of service (QoS) purposes.
Question 32 of 50
Which protocol should a network architect research when looking for distance vector protocols?
Correct answer: B) RIP
Explanation: RIP (Routing Information Protocol) is a distance-vector routing protocol.
Question 33 of 50
Which protocol belongs to the Exterior Gateway Protocol (EGP) class?
Correct answer: C) BGP
Explanation: BGP (Border Gateway Protocol) is an Exterior Gateway Protocol used between different autonomous systems on the Internet.
Question 34 of 50
What is the name for the side of the interface connected to a customer’s router?
Correct answer: A) CE
Explanation: The Customer Edge (CE) router is located on the customer’s premises and connects to the Provider Edge (PE) router.
Question 35 of 50
What is the name of the calculation of the amount of loss suffered by all components along a fiber transmission path?
Correct answer: B) Loss budget
Explanation: The loss budget refers to the calculation of signal loss across a fiber optic path, taking into account all components.
Question 36 of 50
Which entry is NOT found in a routing table?
Correct answer: C) Traffic class
Explanation: Routing tables do not include traffic class as a standard field. Instead, they list destination, next hop, and metric values.
Question 37 of 50
What is the representation of a default route in IPv6?
Correct answer: C) ::/0
Explanation: In IPv6, the default route is represented as ::/0, similar to 0.0.0.0/0 in IPv4.
Question 38 of 50
Which network feature should a sysadmin investigate first when troubleshooting “ICMP Time Exceeded” error messages?
Correct answer: B) Routing loops
Explanation: ICMP Time Exceeded messages often indicate the presence of routing loops, where packets circle between routers.
Question 39 of 50
What should be set up to protect network administrators’ remote access?
Correct answer: A) Authentication
Explanation: Authentication is essential to ensure only authorized users can remotely access the network and its devices.
Question 40 of 50
What command should a technician use to create a new IP configuration for an Ethernet adapter using PowerShell?
Correct answer: A) New-NetIPAddress
Explanation: The PowerShell cmdlet "New-NetIPAddress" is used to configure a new IP address for an Ethernet adapter.
Question 41 of 50
What type of address should a network administrator use when setting up IPv6 router advertisements?
Correct answer: B) Multicast
Explanation: IPv6 router advertisements use multicast addresses to communicate with multiple hosts on the network.
Question 42 of 50
What is a potential cause of out-of-sync system clocks in virtual hosts?
Correct answer: B) NTP misconfiguration
Explanation: Virtual hosts rely on accurate Network Time Protocol (NTP) configuration to maintain synchronized system clocks.
Question 43 of 50
What would have the highest administrative distance?
Correct answer: D) Unknown route
Explanation: Unknown routes are given the highest administrative distance, making them less preferred than known routes.
Question 44 of 50
What device uses RJ-11 plugs to connect to a network?
Correct answer: B) DSL modem
Explanation: DSL modems typically use RJ-11 connectors to connect to telephone lines.
Question 45 of 50
Which topology connects nodes in a closed loop?
Correct answer: C) Ring
Explanation: In a ring topology, each node is connected to its neighbor, forming a closed loop.
Question 46 of 50
What network protocol is commonly used to manage IoT devices remotely?
Correct answer: C) MQTT
Explanation: MQTT is a lightweight protocol commonly used for messaging and controlling IoT devices
Question 47 of 50
What network device separates broadcast domains?
Correct answer: C) Router
Explanation: Routers separate broadcast domains, while switches and hubs operate within the same broadcast domain.
Question 48 of 50
What should be used to test Ethernet cabling for continuity and pinout verification?
Correct answer: C) Wire map
Explanation: A wire map tester checks the continuity and pinout of Ethernet cables.
Question 49 of 50
What routing protocol allows routers to share incremental updates instead of full routing tables?
Correct answer: B) EIGRP
Explanation: EIGRP is a hybrid routing protocol that shares incremental updates instead of full routing tables.
Question 50 of 50
What IPv4 header field should a security engineer filter to investigate ARP-related traffic?
Correct answer: C) Protocol
Explanation: ARP traffic is related to the protocol field in the IPv4 header, allowing ARP filtering to identify malicious traffic.
Set 1 complete
You scored 0%
0 correct out of 0 answered (50 questions in this set).