50 multiple-choice questions with answers and detailed explanations. Untimed — choose an answer to check it instantly.
0/50 answered0 correct
Question 1 of 50
Which routing protocol is classified as an exterior gateway protocol and is used to exchange routing information between autonomous systems?
Correct answer: B) BGP
Explanation: BGP (Border Gateway Protocol) is the exterior gateway protocol used to exchange routing information between different autonomous systems.
Question 2 of 50
Which two protocols manage neighbor discovery processes on IPv4 networks?
Correct answer: C) ICMP and ARP
Explanation: ICMP (Internet Control Message Protocol) and ARP (Address Resolution Protocol) are responsible for neighbor discovery in IPv4 networks.
Question 3 of 50
When a router cannot determine a path to a message’s destination, where does it send the message?
Correct answer: C) Gateway of last resort
Explanation: The gateway of last resort is used when no other specific route is found in the routing table.
Question 4 of 50
Which field in a TCP segment is used to determine if an arriving data unit matches the data unit sent by the source?
Correct answer: C) Checksum
Explanation: The checksum field ensures the integrity of the data by checking if the received data matches what was sent.
Question 5 of 50
Which OSI layer is responsible for directing data from one LAN to another?
Correct answer: C) Network layer
Explanation: The Network layer (Layer 3) is responsible for directing data from one LAN to another using routing protocols.
Question 6 of 50
At which OSI layer does IP operate?
Correct answer: A) Network layer
Explanation: IP operates at Layer 3, the Network layer, where it handles logical addressing and routing.
Question 7 of 50
Which protocol’s header would a Layer 4 device read and process?
Correct answer: C) TCP
Explanation: A Layer 4 device processes transport layer protocols like TCP and UDP, which are responsible for ensuring reliable data transfer.
Question 8 of 50
What is the Internet standard MTU size for Ethernet networks?
Correct answer: B) 1,500 bytes
Explanation: The standard Maximum Transmission Unit (MTU) for Ethernet networks is 1,500 bytes.
Question 9 of 50
What kind of route is created when a network administrator manually configures a router to use a specific path between nodes?
Correct answer: A) Static route
Explanation: A static route is a manually configured route, which doesn’t change unless the administrator updates it.
Question 10 of 50
Which number indicates a routing protocol’s reliability, with lower values being given higher priority?
Correct answer: C) Administrative distance
Explanation: Administrative distance is used to rank the trustworthiness of routing protocols, with lower values indicating higher reliability.
Question 11 of 50
Which core protocol in the TCP/IP suite belongs to the Data Link layer and is used to discover MAC addresses?
Correct answer: C) ARP
Explanation: ARP (Address Resolution Protocol) is used to discover the MAC address associated with an IP address on the local network.
Question 12 of 50
Which routing protocol uses bandwidth and delay as default metrics for path selection in Enhanced Interior Gateway Routing Protocol (EIGRP)?
Correct answer: D) EIGRP
Explanation: EIGRP uses a composite metric based on bandwidth and delay to select the best path.
Question 13 of 50
If a router receives a packet with a destination address not found in its routing table and is configured to send all such packets to a specific next-hop address, what is this next-hop address called?
Correct answer: B) Default route
Explanation: A default route is used when no other routes are available in the routing table.
Question 14 of 50
Which routing protocol ensures that every router in the network has complete knowledge of the network topology?
Correct answer: A) OSPF
Explanation: OSPF is a link-state protocol where each router maintains a complete map of the network topology.
Question 15 of 50
How does RIP prevent routing loops in a small network with a hop limit of 10?
Correct answer: C) By limiting the number of hops allowed in a path
Explanation: RIP prevents routing loops by limiting the number of hops a packet can take to 15.
Question 16 of 50
What type of device is designed to combine several internet connections and share traffic equally among them?
Correct answer: B) Load balancer
Explanation: A load balancer distributes network traffic across multiple connections, optimizing network performance and reliability.
Question 17 of 50
Which of the following is NOT a valid application of a virtual IP address?
Correct answer: D) IPsec
Explanation: Virtual IP addresses are commonly used in NAT and gateway redundancy but are not a feature of IPsec.
Question 18 of 50
Which OSI layer does TCP operate at?
Correct answer: C) Transport layer
Explanation: TCP operates at the Transport layer (Layer 4), providing reliable communication between devices.
Question 19 of 50
Which OSI layer is responsible for the mechanical connection to the network?
Correct answer: A) Physical layer
Explanation: The Physical layer (Layer 1) handles the mechanical, electrical, and procedural connections to the network.
Question 20 of 50
Which layer of the OSI model is responsible for encryption and data compression?
Correct answer: C) Presentation layer
Explanation: The Presentation layer (Layer 6) handles the formatting, encryption, and compression of data.
Question 21 of 50
In the OSI model, which layer is responsible for establishing, maintaining, and terminating communication sessions between network devices?
Correct answer: B) Session layer
Explanation: The Session layer (Layer 5) manages sessions and controls the dialog between devices on a network.
Question 22 of 50
Which type of route is created when a router automatically discovers routes using routing protocols like OSPF or RIP?
Correct answer: B) Dynamic route
Explanation: Dynamic routes are created when routers use routing protocols to automatically discover and update routes.
Question 23 of 50
What is the purpose of ARP in a network?
Correct answer: A) To translate IP addresses into MAC addresses
Explanation: ARP (Address Resolution Protocol) translates IP addresses into MAC addresses to facilitate communication within a local network.
Question 24 of 50
What command is used to copy the running configuration from a router to a TFTP server?
Correct answer: B) copy run tftp
Explanation: The command copy run tftp copies the router's running configuration to a TFTP server.
Question 25 of 50
Which OSI layer combines messages or segments into packets?
Correct answer: C) Network layer
Explanation: The Network layer (Layer 3) is responsible for combining segments or messages into packets and routing them between networks.
Question 26 of 50
What OSI layer is responsible for adding a header that includes routing information?
Correct answer: A) Network layer
Explanation: The Network layer (Layer 3) adds the header that includes the logical addressing (IP addresses) used for routing.
Question 27 of 50
Which OSI layer is considered the media access control layer?
Correct answer: A) Data Link layer
Explanation: The Data Link layer (Layer 2) is responsible for MAC addressing and ensuring error-free data transfer between adjacent nodes.
Question 28 of 50
Which network device is used to reduce collision domains in a network?
Correct answer: B) Switch
Explanation: A switch reduces collision domains by providing dedicated bandwidth to each port.
Question 29 of 50
Which device is responsible for connecting different networks and routing packets between them?
Correct answer: B) Router
Explanation: A router is responsible for connecting different networks and routing packets based on their destination IP address.
Question 30 of 50
In an IPv6 network, what mechanism is used by routers to inform clients of the available prefixes and other configuration options?
Correct answer: B) Router Advertisement
Explanation: In IPv6, routers use Router Advertisement messages to inform clients of network prefixes and other configuration information.
Question 31 of 50
What is the primary benefit of using dynamic routing protocols such as OSPF or EIGRP?
Correct answer: B) Automatic route updates
Explanation: Dynamic routing protocols automatically update the routing table when network topology changes, reducing the need for manual configuration.
Question 32 of 50
Which of the following is a protocol used to discover the MAC address of a device on a local network, given its IP address?
Correct answer: B) ARP
Explanation: ARP (Address Resolution Protocol) is used to resolve the MAC address for a given IP address on a local network.
Question 33 of 50
Which command can display the routing protocols running on a router?
Correct answer: A) show ip protocol
Explanation: The show ip protocol command displays the routing protocols currently running on a router.
Question 34 of 50
Which command can be used to verify that EIGRP is running on a router?
Correct answer: C) show ip protocol
Explanation: The show ip protocol command is used to verify the routing protocols, including EIGRP, running on the router.
Question 35 of 50
Which OSI layer is responsible for managing message fragmentation and reassembly?
Correct answer: D) Transport layer
Explanation: The Transport layer (Layer 4) handles message fragmentation and reassembly to ensure data arrives intact at its destination.
Question 36 of 50
Which port number is used by the TFTP protocol?
Correct answer: B) 69
Explanation: The TFTP protocol uses port 69 for transferring files.
Question 37 of 50
What routing protocol uses the Shortest Path First (SPF) algorithm to calculate the best route?
Correct answer: C) OSPF
Explanation: OSPF (Open Shortest Path First) uses the Shortest Path First algorithm to calculate the best route through the network.
Question 38 of 50
What command would you use to display the configured routes on a router?
Correct answer: B) show ip route
Explanation: The show ip route command displays the routing table and all configured routes on the router.
Question 39 of 50
Which network topology involves all nodes connected to a central hub, and the hub acts as a server to the connected devices?
Correct answer: D) Star
Explanation: In a star topology, all devices connect to a central hub or switch, and the hub acts as a server to the connected devices.
Question 40 of 50
In the OSI model, which layer is responsible for error detection and frame synchronization in Ethernet networks?
Correct answer: A) Data Link layer
Explanation: The Data Link layer (Layer 2) provides error detection and frame synchronization in Ethernet networks.
Question 41 of 50
What is the name of the protocol that is primarily responsible for translating between IP addresses and domain names?
Correct answer: C) DNS
Explanation: DNS (Domain Name System) translates domain names into IP addresses and vice versa.
Question 42 of 50
What term is used to describe a logical grouping of network devices that communicate as if they were on the same physical network, regardless of location?
Correct answer: B) VLAN
Explanation: A VLAN (Virtual Local Area Network) is a logical grouping of devices that communicate as if they were on the same physical network, even if they are located on different physical networks.
Question 43 of 50
Which topology is characterized by a continuous loop where each node connects to two other nodes?
Correct answer: C) Ring
Explanation: In a ring topology, each node is connected to two other nodes, forming a continuous loop for data transmission.
Question 44 of 50
Which command is used to set password protection for privileged mode on a Cisco router?
Correct answer: C) enable secret [password]
Explanation: The enable secret [password] command is used to set password protection for privileged mode on a Cisco router.
Question 45 of 50
Which frame type in the 802.11 standard is used for managing medium access and data delivery, including ACK and RTS/CTS frames?
Correct answer: A) Control frames
Explanation: Control frames in the 802.11 standard are used for managing medium access and data delivery, including ACK and RTS/CTS frames.
Question 46 of 50
What network device stores records that map local IP addresses to MAC addresses?
Correct answer: B) ARP table
Explanation: The ARP table stores records that map local IP addresses to MAC addresses, facilitating local network communication.
Question 47 of 50
Which command is used on a Cisco switch to create a new VLAN with the name “Admin”?
Correct answer: A) vlan 10 name Admin
Explanation: The command vlan 10 name Admin is used to create a VLAN with the name "Admin" on a Cisco switch.
Question 48 of 50
Which wireless network technology does not require a clear line of sight (LOS) to function?
Correct answer: A) Wi-Fi
Explanation: Wi-Fi does not require a clear line of sight to function, unlike infrared or microwave technologies.
Question 49 of 50
What OSI layer manages session establishment, maintenance, and termination between network devices?
Correct answer: B) Session layer
Explanation: The Session layer (Layer 5) manages session establishment, maintenance, and termination between devices.
Question 50 of 50
Which 802.11 standard can operate on both the 2.4 GHz and 5 GHz frequency bands?
Correct answer: D) 802.11n
Explanation: The 802.11n standard can operate on both the 2.4 GHz and 5 GHz frequency bands.
Set 2 complete
You scored 0%
0 correct out of 0 answered (50 questions in this set).