Which Layer 4 protocol and TWO ports does DHCP use?
Correct answer:
C) UDP 67, UDP 68
Explanation: DHCP uses the UDP protocol and operates on ports 67 (server) and 68 (client).
Which Layer 4 protocol and TWO ports does DHCP use?
Correct answer:
C) UDP 67, UDP 68
Explanation: DHCP uses the UDP protocol and operates on ports 67 (server) and 68 (client).
Which Layer 4 protocol and port does DNS use for queries?
Correct answer:
B) UDP 53
Explanation: DNS uses UDP on port 53 for standard queries, though TCP can also be used for larger transfers like zone transfers.
What are the three primary clear text Layer 7 protocols and ports used for email?
Correct answer:
A) SMTP TCP 25, POP3 TCP 110, IMAP4 TCP 143
Explanation: SMTP, POP3, and IMAP4 are the standard protocols used for sending and receiving email, and they operate on TCP ports 25, 110, and 143, respectively.
What are the encrypted and unencrypted port numbers for LDAP?
Correct answer:
B) TCP 389, TCP 636
Explanation: LDAP uses port 389 for unencrypted communication and port 636 for encrypted communication.
What Layer 4 protocol(s) and ports does SIP use?
Correct answer:
B) TCP 5060, TCP 5061
Explanation: SIP uses ports 5060 (unencrypted) and 5061 (encrypted) for VoIP and multimedia sessions.
What are the 4 core protocols in the TCP/IP suite?
Correct answer:
C) TCP, UDP, IP, ICMP
Explanation: The four core protocols of the TCP/IP suite are TCP, UDP, IP, and ICMP, which provide essential communication and error-handling services.
What are the 7 OSI layers in order, from top to bottom?
Correct answer:
B) Application, Presentation, Session, Transport, Network, Data Link, Physical
Explanation: The OSI model is structured from the Application layer (top) down to the Physical layer (bottom).
Which mechanism is controlled by a hub between CSMA/CD and CSMA/CA?
Correct answer:
A) CSMA/CD
Explanation: CSMA/CD (Carrier Sense Multiple Access with Collision Detection) is used in wired Ethernet networks where hubs control the medium.
What defines the boundary of a collision domain?
Correct answer:
B) Switch port
Explanation: A switch port defines the boundary of a collision domain because switches operate at Layer 2 and segment collision domains.
What defines the boundary of a broadcast domain?
Correct answer:
C) Router
Explanation: Routers separate broadcast domains by not forwarding broadcast traffic between different networks.
Which table includes the physical port number between a MAC table and an ARP table?
Correct answer:
B) MAC table
Explanation: A MAC table contains entries that map MAC addresses to physical port numbers on a switch.
Which popular routing protocol is a link-state protocol?
Correct answer:
C) OSPF
Explanation: OSPF (Open Shortest Path First) is a link-state routing protocol used to calculate the shortest path for network traffic.
Which popular routing protocol is a hybrid between distance vector and link-state?
Correct answer:
C) EIGRP
Explanation: EIGRP (Enhanced Interior Gateway Routing Protocol) is a hybrid protocol that combines the features of both distance vector and link-state protocols.
Which popular routing protocol is an exterior gateway protocol?
Correct answer:
D) BGP
Explanation: BGP (Border Gateway Protocol) is an exterior gateway protocol used to exchange routing information between different autonomous systems.
In IPv6, what does a router use to inform a client of the network prefix?
Correct answer:
C) Router advertisement
Explanation: In IPv6, routers send Router Advertisement messages to inform clients about the network prefix and other configuration details.
Which QoS mechanism embeds traffic priority in an IP header?
Correct answer:
B) Diffserv
Explanation: Diffserv (Differentiated Services) embeds traffic priority information into the IP header to manage quality of service.
What IEEE designation is used for VLAN trunking?
Correct answer:
C) 802.1q
Explanation: IEEE 802.1q is the standard for VLAN tagging, used for VLAN trunking across network devices.
Which two IPv4 address classes do not use a subnet mask?
Correct answer:
C) Class D, Class E
Explanation: Class D (multicast) and Class E (experimental) addresses do not require subnet masks.
In which network topology is every node a repeater?
Correct answer:
C) Ring
Explanation: In a ring topology, each node is a repeater, forwarding data to the next node in the ring.
An Ad-hoc wireless network uses which type of network topology?
Correct answer:
D) Mesh
Explanation: Ad-hoc wireless networks typically use a mesh topology, where each device can communicate directly with others.
At what OSI Layer are most LAN and WAN protocols defined?
Correct answer:
B) Layer 2
Explanation: Most LAN and WAN protocols are defined at Layer 2 (Data Link layer), where the protocols handle the physical addressing and error checking.
Which cellular technology is widely implemented across the globe?
Correct answer:
C) GSM
Explanation: GSM (Global System for Mobile Communications) is the most widely used cellular technology worldwide.
Which type of DNS record is used for spam control?
Correct answer:
D) TXT record
Explanation: TXT records are used in DNS to store text information, including SPF and DKIM records for email spam control.
What do you configure in DHCP to add the address of the default gateway and DNS server?
Correct answer:
C) Scope options
Explanation: In DHCP, scope options are used to define parameters such as the default gateway and DNS server for clients in the specified scope.
What connector type is used for ordinary telephone cables?
Correct answer:
A) RJ-11
Explanation: RJ-11 connectors are commonly used for telephone lines, while RJ-45 is used for Ethernet cables.
Which twisted pair cable category is a cheaper alternative to using CAT 6?
Correct answer:
B) CAT 5e
Explanation: CAT 5e is a cost-effective alternative to CAT 6 for most network installations, providing support for gigabit speeds over shorter distances.
What is a generic network term that can either refer to a software switch or any device that connects dissimilar network segments?
Correct answer:
C) Bridge
Explanation: A bridge is a network device used to connect different network segments, either in hardware or software.
RADIUS, TACACS, and TACACS+ are all examples of what type of security system?
Correct answer:
C) Authentication
Explanation: RADIUS, TACACS, and TACACS+ are used for centralized authentication services in networks.
What is the name for the thin layer that sits between the hardware and operating system and controls the virtual environment?
Correct answer:
A) Hypervisor
Explanation: A hypervisor is software that allows multiple virtual machines to run on a single physical host by abstracting the underlying hardware.
How many B and D channels does Primary Rate Interface (PRI) ISDN have?
Correct answer:
A) 23 B, 1 D
Explanation: PRI ISDN provides 23 B channels for data and 1 D channel for signaling, commonly used in T1 lines.
What type of demarc allows a telco to conduct remote diagnostics on your phone line?
Correct answer:
A) Smart jack
Explanation: A smart jack is a type of demarcation point that allows remote diagnostics and troubleshooting by the service provider.
What type of diagram shows the placement of devices in an equipment rack?
Correct answer:
C) Rack diagram
Explanation: A rack diagram illustrates the arrangement and placement of devices in a network equipment rack.
What term refers to the expected time for a device or system to be back in service after a failure?
Correct answer:
A) Mean Time to Repair (MTTR)
Explanation: MTTR refers to the average time it takes to repair a device or system after it fails.
What type of security system examines the logs of many network devices, looking for event correlation and trends?
Correct answer:
B) Security Information and Event Management (SIEM)
Explanation: SIEM systems aggregate and analyze logs from various network devices to identify potential security threats.
A site-to-site VPN between two routers typically uses which VPN protocol?
Correct answer:
B) IPSEC
Explanation: IPSEC is the most commonly used protocol for establishing secure site-to-site VPNs between routers.
Uncontrolled use of proprietary software can lead to what type of violations?
Correct answer:
C) Licensing restrictions
Explanation: Uncontrolled use of proprietary software can violate licensing agreements, leading to legal and financial penalties.
Traditional biometrics (something you are) have been extending to include what authentication factor?
Correct answer:
B) Something you do
Explanation: Biometric authentication has evolved to include "something you do," such as behavioral biometrics like typing patterns or gait.
What two encryption protocols are used in WPA2?
Correct answer:
B) AES and CCMP
Explanation: WPA2 uses AES (Advanced Encryption Standard) for encryption and CCMP (Counter Mode with Cipher Block Chaining Message Authentication Code Protocol) for message integrity.
What key management protocol was introduced in WPA?
Correct answer:
B) TKIP
Explanation: TKIP (Temporal Key Integrity Protocol) was introduced in WPA to improve encryption key management and address weaknesses in WEP.
What type of attack replaces good ARP cache entries with malicious ones?
Correct answer:
B) ARP poisoning/spoofing
Explanation: ARP poisoning/spoofing involves sending false ARP messages to a network, causing incorrect IP-to-MAC address mappings in the ARP cache.
What can you use to periodically verify that a file has maintained its integrity?
Correct answer:
B) File hashing
Explanation: File hashing creates a unique hash value for a file that can be used to verify its integrity over time, ensuring it hasn't been tampered with or corrupted.
What type of feature works with spanning tree to mitigate the risk of introducing rogue root switches?
Correct answer:
B) Root guard
Explanation: Root guard is a feature used in spanning tree protocols to prevent unauthorized switches from becoming the root switch.
What type of punch-down block is typically found on the back of a patch panel?
Correct answer:
B) 110 block
Explanation: 110 punch-down blocks are commonly used on the back of patch panels to terminate and organize network cables.
What hardware tool can identify breaks and insertion loss in a fiber optic cable?
Correct answer:
C) OTDR
Explanation: An Optical Time-Domain Reflectometer (OTDR) is used to detect faults, breaks, and loss of signal in fiber optic cables.
What command identifies a network path as well as reports on packet loss?
Correct answer:
C) pathping
Explanation: The pathping command is a combination of ping and traceroute, providing both route information and packet loss statistics.
What command is the Linux equivalent of ipconfig?
Correct answer:
B) ifconfig
Explanation: In Linux systems, the ifconfig command is used to configure and display network interface settings, similar to ipconfig in Windows.
What common command line tool can be used to port scan a network?
Correct answer:
C) nmap
Explanation: Nmap is a widely used tool for network discovery and security auditing, often employed to scan open ports on a network.
What type of cable flips the transmit and receive pairs?
Correct answer:
B) Crossover cable
Explanation: Crossover cables are used to connect two similar devices directly, such as two computers or two switches, by flipping the transmit and receive pairs.
What is the word for variable latency?
Correct answer:
A) Jitter
Explanation: Jitter refers to the variation in packet delay, which can cause issues in real-time applications like VoIP.
What is typically responsible for handing out unauthorized IP addresses to clients?
Correct answer:
B) Rogue DHCP server
Explanation: A rogue DHCP server is an unauthorized server that hands out incorrect IP addresses to clients, potentially disrupting network communication.
If this exam is giving you a hard time, let us be your helping hand. Contact us, and we'll provide the assistance you need to pass and move forward.