50 multiple-choice questions with answers and detailed explanations. Untimed — choose an answer to check it instantly.
0/50 answered0 correct
Question 1 of 50
What is a common basis for allocating manufacturing overhead in a traditional costing system?
Correct answer: B) Direct labor hours
Explanation: In traditional costing systems, manufacturing overhead is typically allocated based on direct labor hours as it is an easily measurable activity that relates to production.
Question 2 of 50
In an activity-based costing system, what are the factors that cause overhead costs called?
Correct answer: B) Cost drivers
Explanation: Cost drivers in ABC systems represent the activities that cause costs to be incurred, which helps to allocate overhead more precisely compared to traditional methods.
Question 3 of 50
What does activity-based costing (ABC) take into account that traditional costing does not?
Correct answer: C) Non-manufacturing costs
Explanation: ABC systems allocate costs related to both manufacturing and non-manufacturing activities, allowing for a more comprehensive understanding of product costs.
Question 4 of 50
How is overhead applied in an ABC system?
Correct answer: C) Using multiple cost drivers
Explanation: ABC uses multiple cost drivers, each related to different activities, to allocate overhead more accurately, as opposed to traditional methods that use a single cost driver.
Question 5 of 50
In a CVP graph, what does the vertical intercept of the total cost line represent?
Correct answer: A) Total fixed costs
Explanation: The vertical intercept on the CVP graph represents total fixed costs, as these are the costs incurred even if no units are produced.
Question 6 of 50
Which costs are included in the calculation of conversion costs?
Correct answer: B) Manufacturing overhead and direct labor
Explanation: Conversion costs include direct labor and manufacturing overhead, as these are the costs needed to convert raw materials into finished products.
Question 7 of 50
What does “margin of safety” represent in CVP analysis?
Correct answer: A) The percentage of sales above breakeven
Explanation: Margin of safety shows how much sales can drop before the company reaches its breakeven point, which is a measure of risk.
Question 8 of 50
Which account is credited when manufacturing overhead is applied to Work-in-Process?
Correct answer: D) Manufacturing overhead
Explanation: When manufacturing overhead is applied, the manufacturing overhead account is credited, reducing the balance of overhead to be applied.
Question 9 of 50
What is the formula for calculating contribution margin?
Correct answer: A) Sales revenue minus variable costs
Explanation: Contribution margin is the amount remaining from sales after variable costs are subtracted, which can be used to cover fixed costs.
Question 10 of 50
What is the definition of break-even sales in units?
Correct answer: A) Total fixed costs divided by contribution margin per unit
Explanation: The break-even point in units is the number of units that must be sold to cover fixed costs, calculated by dividing fixed costs by the contribution margin per unit.
Question 11 of 50
Which type of costing method is most appropriate for industries with identical or homogenous products?
Correct answer: B) Process costing
Explanation: Process costing is used in industries where identical products are produced in large quantities and costs are assigned evenly across all units.
Question 12 of 50
What is the primary difference between job order costing and process costing?
Correct answer: C) Process costing averages costs over a continuous flow of units.
Explanation: Process costing assigns costs to a continuous flow of identical units, while job order costing assigns costs to individual, distinct jobs.
Question 13 of 50
Which of the following is considered a facility-level cost in an ABC system?
Correct answer: C) Factory security
Explanation: Facility-level costs are costs incurred to maintain the entire production facility, regardless of the number of units produced.
Question 14 of 50
What is the cost object in an activity-based costing system?
Correct answer: A) A product or service
Explanation: The cost object in ABC is the product or service that is being measured for cost allocation based on activities performed.
Question 15 of 50
Which cost is considered a direct cost in a manufacturing environment?
Correct answer: C) Direct materials
Explanation: Direct materials are those that can be directly traced to the production of a product, unlike indirect costs such as utilities or rent.
Question 16 of 50
What is the purpose of cost drivers in an ABC system?
Correct answer: C) To allocate overhead costs
Explanation: Cost drivers in an ABC system are used to allocate overhead costs based on the activities that drive the cost.
Question 17 of 50
Which of the following statements is true regarding activity-based costing?
Correct answer: C) It assigns overhead based on actual activities performed.
Explanation: ABC assigns overhead based on the specific activities that are required to produce each product, making the allocation more accurate.
Question 18 of 50
What is the predetermined overhead rate formula?
Correct answer: C) Estimated manufacturing overhead divided by expected operating activity
Explanation: The predetermined overhead rate is calculated by dividing estimated manufacturing overhead by the expected level of activity (such as labor hours or machine hours).
Question 19 of 50
What type of costing system would be appropriate for a company producing custom furniture?
Correct answer: A) Job order costing
Explanation: Job order costing is appropriate for industries where products are custom-made or produced in small batches, such as custom furniture.
Question 20 of 50
How are overhead costs treated in an activity-based costing system?
Correct answer: C) They are allocated based on multiple cost drivers.
Explanation: ABC allocates overhead using multiple cost drivers, which relate to different activities that incur costs.
Question 21 of 50
What is the equivalent units of production used for in process costing?
Correct answer: C) To measure the amount of work done during the period
Explanation: Equivalent units of production are used to measure the work done during the period in a process costing system, accounting for both completed and partially completed units.
Question 22 of 50
In job order costing, what is the journal entry to record direct labor costs?
Correct answer: B) Debit to work-in-process inventory, credit to salaries and wages payable
Explanation: Direct labor costs are recorded by debiting work-in-process inventory, which represents the ongoing production, and crediting salaries and wages payable.
Question 23 of 50
What is the purpose of activity-based costing (ABC)?
Correct answer: A) To allocate costs more accurately to products or services
Explanation: ABC provides a more accurate method of allocating costs to products or services by using multiple cost drivers related to activities performed.
Question 24 of 50
In a job order costing system, how are manufacturing overhead costs applied to jobs?
Correct answer: B) Using a predetermined overhead rate
Explanation: Manufacturing overhead is applied to jobs using a predetermined overhead rate, which is based on estimates of future costs and activity levels.
Question 25 of 50
What are direct labor costs in manufacturing?
Correct answer: C) Wages of employees working directly on the production of goods
Explanation: Direct labor costs are the wages of employees who are directly involved in the production of goods, as opposed to indirect labor like maintenance staff.
Question 26 of 50
What type of cost is depreciation on factory equipment classified as in manufacturing?
Correct answer: B) Manufacturing overhead
Explanation: Depreciation on factory equipment is considered a manufacturing overhead cost because it cannot be directly traced to a specific product, but is necessary for production.
Question 27 of 50
How are overapplied manufacturing overhead costs typically disposed of at the end of a period?
Correct answer: D) Credited to cost of goods sold
Explanation: When manufacturing overhead is overapplied, the excess amount is credited to cost of goods sold to adjust for the overestimated costs.
Question 28 of 50
Which of the following is an example of a cost driver in an activity-based costing system?
Correct answer: A) Machine hours used
Explanation: In an activity-based costing system, machine hours used is an example of a cost driver, as it directly influences overhead costs associated with machine operations.
Question 29 of 50
When is process costing most appropriately used?
Correct answer: A) When producing large volumes of similar products
Explanation: Process costing is ideal when a company produces large volumes of nearly identical products, such as in continuous production industries.
Question 30 of 50
What is the role of equivalent units in process costing?
Correct answer: B) To calculate the cost per unit for unfinished goods
Explanation: Equivalent units are used to assign a proportionate share of production costs to partially completed goods in process costing.
Question 31 of 50
In job order costing, which document is used to track the costs of materials, labor, and overhead for a specific job?
Correct answer: B) Job cost sheet
Explanation: A job cost sheet is used in job order costing to track the costs of materials, labor, and overhead for a specific job or order.
Question 32 of 50
In an activity-based costing system, what are cost pools?
Correct answer: C) A collection of overhead costs associated with a specific activity
Explanation: In ABC, cost pools group together overhead costs that are incurred by similar activities.
Question 33 of 50
How are indirect labor costs treated in a manufacturing environment?
Correct answer: C) They are part of manufacturing overhead
Explanation: Indirect labor costs, such as maintenance or supervisory salaries, are included in manufacturing overhead, not directly assigned to specific jobs.
Question 34 of 50
What is the formula for calculating cost of goods manufactured?
Correct answer: A) Beginning work-in-process inventory + total manufacturing costs – ending work-in-process inventory
Explanation: Cost of goods manufactured represents the total production costs, adjusted for the change in work-in-process inventory.
Question 35 of 50
What does the term ‘underapplied overhead’ mean?
Correct answer: B) The overhead applied to jobs is less than actual overhead
Explanation: Underapplied overhead occurs when the amount of overhead applied using a predetermined rate is less than the actual overhead incurred.
Question 36 of 50
Which of the following is a disadvantage of using activity-based costing?
Correct answer: B) It is complex and costly to implement
Explanation: One disadvantage of ABC is that it can be complex and costly to implement, especially in smaller companies with fewer resources.
Question 37 of 50
How does a company apply overhead to work-in-process in a job order costing system?
Correct answer: B) By using a predetermined overhead rate
Explanation: A predetermined overhead rate is used to apply overhead costs to jobs based on an estimated activity level, such as labor hours or machine hours.
Question 38 of 50
In process costing, how is the cost of units completed and transferred out calculated?
Correct answer: A) By multiplying the cost per unit by the number of units completed
Explanation: In process costing, the cost of completed and transferred-out units is calculated by multiplying the cost per equivalent unit by the number of units transferred out.
Question 39 of 50
Which of the following costs is classified as a batch-level cost in an ABC system?
Correct answer: C) Machine setup for a production run
Explanation: Batch-level costs, such as machine setup, are incurred every time a batch of products is produced, regardless of the number of units in the batch.
Question 40 of 50
What is the main advantage of using process costing?
Correct answer: B) It simplifies cost allocation for mass production of similar products
Explanation: Process costing is ideal for companies that produce large volumes of similar products because it simplifies cost allocation by averaging costs across units.
Question 41 of 50
Which of the following is a common measure used to allocate overhead in traditional costing systems?
Correct answer: B) Direct labor hours
Explanation: In traditional costing systems, direct labor hours or machine hours are commonly used to allocate overhead costs to products.
Question 42 of 50
In job order costing, what is the journal entry when raw materials are issued to production for use in a specific job?
Correct answer: A) Debit work-in-process inventory, credit raw materials inventory
Explanation: When raw materials are used for production, they are transferred from raw materials inventory to work-in-process inventory.
Question 43 of 50
Which of the following statements is true about job order costing?
Correct answer: B) It tracks costs for each individual job separately.
Explanation: Job order costing is used to track the costs of producing custom jobs or batches, where each job is tracked separately.
Question 44 of 50
Which cost category is typically not included in direct product costs?
Correct answer: C) Administrative expenses
Explanation: Administrative expenses are not directly related to the production process and are considered period costs, not product costs.
Question 45 of 50
What is the main purpose of a job cost sheet?
Correct answer: C) To track the direct and indirect costs associated with a specific job
Explanation: A job cost sheet is used to record all the direct materials, direct labor, and applied overhead for a specific job in job order costing.
Question 46 of 50
What does the predetermined overhead rate represent?
Correct answer: B) The rate used to apply overhead to jobs based on a specific activity base
Explanation: The predetermined overhead rate is used to apply overhead costs to jobs or products and is based on an activity measure such as direct labor hours or machine hours.
Question 47 of 50
What happens when overhead is underapplied?
Correct answer: B) Applied overhead is less than actual overhead
Explanation: Underapplied overhead means the company applied less overhead than it actually incurred, resulting in actual overhead exceeding applied overhead.
Question 48 of 50
Which of the following would most likely use a job order costing system?
Correct answer: B) A law firm providing legal services
Explanation: Job order costing is appropriate for businesses like law firms that provide custom services and track costs for each specific job or client.
Question 49 of 50
In a process costing system, what is a key characteristic of how costs are assigned to products?
Correct answer: B) Costs are averaged over all units produced during the period
Explanation: In process costing, costs are averaged over the entire production for the period because the products are usually identical or similar.
Question 50 of 50
What does the term ‘conversion costs’ refer to in a process costing system?
Correct answer: C) Direct labor and manufacturing overhead costs
Explanation: Conversion costs in process costing are the combined costs of direct labor and manufacturing overhead, which are incurred to convert raw materials into finished products.
Set 2 complete
You scored 0%
0 correct out of 0 answered (50 questions in this set).