50 multiple-choice questions with answers and detailed explanations. Untimed — choose an answer to check it instantly.
0/50 answered0 correct
Question 1 of 50
Which of the following should be included as manufacturing overhead cost?
Correct answer: D) The wages of factory custodians
Explanation: The wages of factory custodians are considered part of manufacturing overhead because they are indirect labor costs related to production.
Question 2 of 50
The glue and nails used in a manufacturing process should be included in which cost category?
Correct answer: B) Manufacturing overhead costs
Explanation: Glue and nails are considered indirect materials and are part of manufacturing overhead costs.
Question 3 of 50
. How is the purchase of raw materials on open account recorded?
Correct answer: D) Debit to raw materials inventory
Explanation: A purchase of raw materials on account increases raw materials inventory, which is recorded as a debit.
Question 4 of 50
Which journal entry is used to record payment of factory rent in cash?
Correct answer: D) Debit to manufacturing overhead
Explanation: Payment for factory rent is recorded as manufacturing overhead, which is an indirect cost of production.
Question 5 of 50
What is the manufacturing overhead rate that is applied to work-in-process during manufacturing?
Correct answer: A) An estimate based on expected overhead and machine/labor hours
Explanation: Manufacturing overhead is typically applied to work-in-process using a predetermined overhead rate based on expected costs and allocation factors like machine or labor hours.
Question 6 of 50
In a job order costing system, what does a debit to work-in-process inventory and a credit to salaries and wages payable represent?
Correct answer: C) Assigning direct labor costs to products being manufactured
Explanation: This journal entry reflects assigning direct labor costs to the work-in-process inventory.
Question 7 of 50
In a job order costing system, what does a debit to manufacturing overhead and a credit to salaries and wages payable represent?
Correct answer: A) Recording indirect labor costs to manufacturing overhead
Explanation: Indirect labor costs (such as supervisors) are recorded as part of manufacturing overhead.
Question 8 of 50
A company budgets manufacturing overhead at $500,000 and direct labor hours at 20,000. What is the predetermined overhead rate?
Correct answer: C) $25 per direct labor hour
Explanation: The predetermined overhead rate is calculated as budgeted overhead divided by budgeted direct labor hours ($500,000 / 20,000 = $25).
Question 9 of 50
What is the correct order of steps for accounting for manufacturing overhead?
Correct answer: A) Budget overhead, record actual overhead, apply overhead to WIP, eliminate overapplied/underapplied overhead
Explanation: The process begins by budgeting overhead, recording actual overhead, applying overhead, and adjusting for over- or underapplied overhead.
Question 10 of 50
How are actual manufacturing overhead costs recorded during the year?
Correct answer: B) Debits to the manufacturing overhead account
Explanation: Actual manufacturing overhead costs are debited to the manufacturing overhead account.
Question 11 of 50
What would least likely be assigned to manufacturing overhead?
Correct answer: D) Materials that are a key component to making manufactured goods
Explanation: Key materials used directly in manufacturing goods are considered direct materials, not overhead.
Question 12 of 50
Applied manufacturing overhead is directly recorded as a credit to which account?
Correct answer: C) Manufacturing overhead
Explanation: When manufacturing overhead is applied, it is credited to the manufacturing overhead account.
Question 13 of 50
When manufacturing overhead is underapplied, which entry is included in closing the manufacturing overhead account?
Correct answer: A) Debit to cost of goods sold
Explanation: Underapplied overhead means not enough overhead was applied, so it is added to cost of goods sold.
Question 14 of 50
At the end of an accounting period, the manufacturing overhead account has debits totaling $25,000 and credits totaling $28,000. What does this mean?
Correct answer: C) Manufacturing overhead is overapplied by $3,000
Explanation: Overapplied overhead occurs when more overhead is applied than actually incurred ($28,000 - $25,000 = $3,000 overapplied).
Question 15 of 50
What does a journal entry debiting cost of goods sold and crediting manufacturing overhead represent?
Correct answer: A) Recording underapplied manufacturing overhead
Explanation: This entry adjusts for underapplied overhead by increasing cost of goods sold.
Question 16 of 50
What is an alternative way to eliminate overapplied or underapplied manufacturing overhead besides recording it to cost of goods sold?
Correct answer: B) Allocate to work-in-process inventory, finished goods inventory, and cost of goods sold
Explanation: Over- or underapplied overhead can be prorated across inventory and cost of goods sold based on ending balances.
Question 17 of 50
An overapplication of manufacturing overhead would be corrected by which journal entry?
Correct answer: B) Debiting manufacturing overhead and crediting cost of goods sold
Explanation: To correct overapplied overhead, manufacturing overhead is debited (to reduce it) and cost of goods sold is credited.
Question 18 of 50
In which case is it appropriate to use job costing?
Correct answer: C) When the activities performed in each process center are different for all units produced
Explanation: Job costing is used when production processes and costs vary by job or product.
Question 19 of 50
A company has accrued but not paid direct labor wages in cash. What is part of the journal entry to record the amount of direct labor wages earned?
Correct answer: B) Debit work-in-process inventory
Explanation: Direct labor costs are debited to work-in-process inventory.
Question 20 of 50
What is process costing?
Correct answer: B) A method of product costing in which costs are accumulated and tracked by process and averaged over all products made during the period
Explanation: Process costing is used when products are manufactured in continuous processes and costs are averaged over all units produced.
Question 21 of 50
Which products would be produced using the process costing method?
Correct answer: D) Manufacturing bottles of ketchup for sale in grocery stores
Explanation: Process costing is suitable for mass-produced items like ketchup.
Question 22 of 50
Which is true regarding process costing?
Correct answer: C) Process costing assigns costs equally to each unit produced during a period
Explanation: Process costing evenly distributes costs to all units produced in a period.
Question 23 of 50
Which manufacturing company should use process costing?
Correct answer: A) A gasoline refinery
Explanation: Process costing is suitable for industries like gasoline refining, where products are continuously mass-produced.
Question 24 of 50
In a process costing system, what is the correct cost calculation step?
Correct answer: D) Calculate the average cost using total manufacturing costs for each product
Explanation: Process costing averages total costs over all units produced.
Question 25 of 50
When is it appropriate to use process costing?
Correct answer: B) When a company produces a large volume of products using a series of uniform processes
Explanation: Process costing is used for large volumes of products that pass through a uniform series of production processes.
Question 26 of 50
What is a unique feature of process costing?
Correct answer: B) The units go through process centers when being produced
Explanation: Process costing tracks units as they move through various production stages or centers.
Question 27 of 50
Why would a soda company and a gasoline company both primarily use process costing?
Correct answer: C) Because each unit of product produced by the two companies is identical to other products of the same type
Explanation: Process costing works well when products are homogeneous, like soda or gasoline.
Question 28 of 50
What is true about process costing?
Correct answer: C) It is appropriate when the work performed on each product that goes through various work centers is the same
Explanation: Process costing is ideal for situations where similar work is performed on all units.
Question 29 of 50
Process costing would work best when making which products?
Correct answer: B) Producing chewing gum
Explanation: Process costing works well for mass-produced, identical products like chewing gum.
Question 30 of 50
In a process costing system, production costs are accumulated in the process centers. Where do the costs go when all production work is completed in the process centers?
Correct answer: A) Finished goods inventory
Explanation: Once production is complete, costs are transferred to finished goods inventory.
Question 31 of 50
Which is a measure of the amount of work done during the production period under process costing?
Correct answer: C) Equivalent units of production
Explanation: Equivalent units of production measure the work done on partially completed units, allowing accurate cost allocation in process costing.
Question 32 of 50
What are the sum of direct labor and manufacturing overhead costs referred to in a process costing system?
Correct answer: B) Conversion costs
Explanation: Conversion costs represent the total of direct labor and manufacturing overhead, which are the costs required to convert raw materials into finished goods.
Question 33 of 50
Assume a production process using process costing starts with a certain number of units in beginning inventory that are partially completed, a certain number of units are started and completed during the period, and the ending inventory at the end of the period is partially complete. How would you determine the equivalent units of production in this situation for the period?
Correct answer: C) Add the work required to complete the units in beginning inventory to the number of units started and completed during the period to the degree of completion of the ending inventory units
Explanation: This formula accurately accounts for the work done on beginning inventory, units started and completed, and units still in process.
Question 34 of 50
Which cost would most likely be included first in a process center?
Correct answer: B) Direct materials
Explanation: Direct materials are typically the first cost included in the production process as they are required to begin manufacturing.
Question 35 of 50
n process costing, the units completed and the units remaining in ending work-in-process inventory at the end of the period come from which of the following?
Correct answer: A) The units in beginning inventory and the units started during the current period
Explanation: The units "in play" during the period are the sum of the units in beginning inventory and those started during the period.
Question 36 of 50
Which of the following are transferred from work-in-process to finished goods inventory?
Correct answer: D) Actual inventory items and the costs of those inventory items
Explanation: Both the actual goods and their associated costs are transferred to finished goods when they are completed.
Question 37 of 50
Which costs make up the work-in-process inventory costs in the processing centers?
Correct answer: C) Direct materials and conversion costs
Explanation: Work-in-process inventory costs are comprised of direct materials and conversion costs (direct labor and manufacturing overhead).
Question 38 of 50
Which term is used for direct materials and conversion costs associated with items started but not finished?
Correct answer: B) Work-in-process inventory
Explanation: Work-in-process inventory includes all costs incurred for items that are in the process of being produced but are not yet completed.
Question 39 of 50
Which statement accurately describes the equivalent number of units?
Correct answer: D) The equivalent number of units is not the same as the number of physical units transferred to finished goods
Explanation: Equivalent units represent a measure of work done on units, which may differ from the actual number of physical units completed.
Question 40 of 50
The costs that are associated with units completed and transferred out this period are the sum of which components?
Correct answer: B) The cost of beginning work-in-process inventory, both materials and conversion costs; the cost per equivalent unit required to complete those units in beginning inventory; and the cost per equivalent unit of the items started and completed this period, both materials and conversion costs
Explanation: The costs transferred out include all costs related to beginning inventory and units started and completed during the period.
Question 41 of 50
Which statement accurately describes the cost of goods transferred out?
Correct answer: B) The cost of goods transferred out to finished goods is the sum of the costs to make the finished goods in all processes, both in the current or prior period
Explanation: All costs incurred in making the finished goods, whether in the current or prior periods, are included in the cost of goods transferred out.
Question 42 of 50
Which of the following statements summarizes how the cost of the ending work-in-process inventory should be calculated?
Correct answer: C) The sum of the material costs plus the conversion costs for the unfinished units
Explanation: The cost of ending work-in-process inventory is calculated by adding the material costs and conversion costs of the unfinished units.
Question 43 of 50
Which statement calculates the material’s costs in the ending work-in-process inventory at the end of the current period?
Correct answer: C) The materials cost per equivalent unit during the current period multiplied by the material’s equivalent units in the ending work-in-process inventory
Explanation: Material costs are calculated by multiplying the materials cost per equivalent unit during the current period by the number of equivalent units in the ending work-in-process inventory.
Question 44 of 50
Which statement determines the conversion costs in the ending work-in-process inventory at the end of a current period?
Correct answer: B) The conversion cost per equivalent unit during the current period multiplied by the conversion equivalent units in the ending work-in-process inventory
Explanation: Conversion costs for ending work-in-process inventory are calculated by multiplying the conversion cost per equivalent unit for the current period by the number of equivalent units.
Question 45 of 50
The conversion cost of ending work-in-process inventory is equal to which of the following?
Correct answer: C) The conversion cost per equivalent unit this period multiplied by the conversion cost number of equivalent units
Explanation: The conversion cost of ending work-in-process inventory is determined by multiplying the conversion cost per equivalent unit by the number of equivalent units for conversion costs.
Question 46 of 50
The costs of ending work-in-process inventory are calculated by which of the following formulas?
Correct answer: B) Cost per unit of direct materials times equivalent units for materials plus conversion costs per unit times the number of equivalent units for conversion costs
Explanation: The formula to calculate the costs of ending work-in-process inventory includes both direct materials and conversion costs per unit.
Question 47 of 50
What is the number of equivalent units for direct materials equal to?
Correct answer: D) The equivalent units for beginning work-in-process inventory plus the equivalent units for units started and completed plus the equivalent units for ending work-in-process inventory
Explanation: The total number of equivalent units for direct materials is the sum of the equivalent units from beginning inventory, units started and completed, and ending inventory.
Question 48 of 50
When determining the cost per unit of units produced in a processing center, which statement is true?
Correct answer: D) Separate costs are calculated per unit for direct materials and conversion costs for both beginning work-in-process inventory and current period costs
Explanation: In process costing, separate unit costs are calculated for direct materials and conversion costs for both beginning inventory and current period production.
Question 49 of 50
What are the total processing dollars spent during a period in a process center equal to?
Correct answer: A) The sum of the cost of goods transferred out and the cost of ending work-in-process inventory
Explanation: The total processing costs for a period are the sum of the cost of goods transferred out and the cost of the ending work-in-process inventory.
Question 50 of 50
When computing the costs transferred out of a department or processing center, which of the following is true?
Correct answer: A) Only the costs to complete direct materials and the costs to complete conversion of the beginning work-in-process inventory are added to the direct materials costs of the started and completed units
Explanation: The direct materials and conversion costs associated with the beginning work-in-process inventory are added to the total costs of the started and completed units to determine the costs transferred out.
Set 1 complete
You scored 0%
0 correct out of 0 answered (50 questions in this set).