It is a network of users that share computer resources in a limited area.
Correct answer:
A) LAN
Explanation: A LAN (Local Area Network) is a network in a limited geographical area.
It is a network of users that share computer resources in a limited area.
Correct answer:
A) LAN
Explanation: A LAN (Local Area Network) is a network in a limited geographical area.
A set of rules established for users to exchange information.
Correct answer:
A) Protocol
Explanation: A protocol defines rules for communication across a network.
How are Local Area Networks (LANs) defined?
Correct answer:
B) By protocol and topology
Explanation: LANs are typically defined by the protocols used and the topology that determines how devices are interconnected.
The network architecture used to interconnect networking equipment.
Correct answer:
A) Topology
Explanation: Topology refers to the physical or logical layout of a network.
The most common topologies for LANs are?
Correct answer:
B) Bus, Ring, Star
Explanation: The bus, ring, and star topologies are the most common network topologies.
Which topology uses a token that circulates around the network?
Correct answer:
C) Token Ring
Explanation: Token Ring topology uses a token that passes through the network to control access.
A network where each device ensures access for message transmission at regular intervals.
Correct answer:
B) Token Ring
Explanation: Token Ring is a deterministic network where devices get access in a fixed order.
What is the disadvantage of Token Ring topology?
Correct answer:
C) Token pattern errors can stop the network
Explanation: If a token pattern is corrupted, it may stop circulating and halt the network.
What is the solution to Token Ring maintenance issues?
Correct answer:
B) Use a Token Ring hub
Explanation: A Token Ring hub manages the token passing and improves network reliability.
A coaxial cable that is looped through each networking device to transmit data in a bus topology is called?
Correct answer:
B) ThinNet
Explanation: ThinNet is a type of coaxial cable used in bus topology.
All devices on this topology can see each others data traffic.
Correct answer:
C) Bus
Explanation: In bus topology, data is broadcast to all devices connected on the same cable.
In this topology, devices must wait for transmission pauses.
Correct answer:
A) Bus
Explanation: In a bus topology, only one device can transmit at a time, and others must wait.
What is a disadvantage of the bus topology?
Correct answer:
B) Data corruption from simultaneous transmissions
Explanation: If multiple devices transmit simultaneously, data collisions can occur.
Which topology is rarely used in modern networks?
Correct answer:
B) Bus
Explanation: Bus topology is rarely used due to its inefficiency and difficulties with data transmission.
What is the most common topology in today's LANs?
Correct answer:
A) Star
Explanation: Star topology is widely used in modern LANs due to its scalability and ease of troubleshooting.
In this topology, twisted-pair cables with modular plugs are used.
Correct answer:
A) Star
Explanation: Star topology uses twisted-pair cables for easy connection to a central switch or hub.
What facilitates data transfer between devices in a star topology?
Correct answer:
B) Hub or switch
Explanation: In a star topology, hubs or switches manage data flow between devices.
A hub transmits data to:
Correct answer:
B) All connected devices
Explanation: A hub broadcasts data to all devices in the network.
A device that repeats signals in a network:
Correct answer:
A) Hub
Explanation: Hubs act as multiport repeaters, forwarding data to all connected devices.
What stores the physical address for each device in a star network?
Correct answer:
B) Switch
Explanation: A switch stores the MAC addresses of devices connected to its ports and directs traffic accordingly.
A topology where only the intended destination sees the data traffic.
Correct answer:
A) Star
Explanation: In star topology, only the destination device receives the data from the switch.
An advantage of star topology in troubleshooting.
Correct answer:
C) Adding/removing devices without disruption
Explanation: In star topology, devices can be added or removed without affecting others.
All devices are interconnected in which topology?
Correct answer:
B) Mesh
Explanation: In mesh topology, each device is connected to every other device, ensuring full redundancy.
An advantage of a mesh network.
Correct answer:
B) Full redundancy
Explanation: Mesh topology provides multiple data paths, ensuring full redundancy.
A disadvantage of the mesh network.
Correct answer:
A) High cabling cost
Explanation: The multiple data paths increase both the cost and complexity of installation.
The OSI reference model was developed by?
Correct answer:
B) ISO
Explanation: The OSI (Open Systems Interconnection) model was developed by the International Organization for Standardization (ISO).
What year was the OSI model developed?
Correct answer:
B) 1984
Explanation: The OSI model was developed in 1984 to standardize network communication.
What layer of the OSI model provides the electrical connection to the network?
Correct answer:
D) Physical
Explanation: The physical layer of the OSI model handles the electrical and physical connection to the network.
UTP and fiber are examples of which OSI layer?
Correct answer:
B) Physical
Explanation: These are physical media that operate at the physical layer of the OSI model.
What is the second layer of the OSI model?
Correct answer:
A) Data link
Explanation: The data link layer is responsible for error detection and correction.
Which OSI layer handles error recovery and flow control?
Correct answer:
A) Data link
Explanation: The data link layer is responsible for error recovery, flow control, and sequencing.
Which layer is responsible for Media Access Control (MAC)?
Correct answer:
B) Data link
Explanation: MAC addressing is defined in the data link layer.
Ethernet 802.3 is defined in which layer?
Correct answer:
B) Data link
Explanation: The Ethernet 802.3 standard is part of the data link layer.
MAC addresses are part of which OSI layer?
Correct answer:
A) Data link
Explanation: MAC addresses are defined at the data link layer and are used to identify devices on a local network.
The layer responsible for routing in the OSI model.
Correct answer:
B) Network
Explanation: The network layer routes packets between different networks.
IP addresses are found in which layer of the OSI model?
Correct answer:
A) Network
Explanation: IP addresses are used at the network layer for routing packets.
The transport layer is concerned with?
Correct answer:
B) Message integrity
Explanation: The transport layer ensures that data is delivered error-free between source and destination.
Which layer handles segmentation and reassembly?
Correct answer:
C) Transport
Explanation: The transport layer breaks data into segments for transmission and reassembles them at the destination.
Transmission Control Protocol (TCP) operates at which OSI layer?
Correct answer:
B) Transport
Explanation: TCP operates at the transport layer, ensuring reliable data transmission.
Which OSI layer provides control for managing and terminating connections?
Correct answer:
A) Session
Explanation: The session layer establishes, manages, and terminates connections.
Examples of OSI session layer protocols include?
Correct answer:
C) NFS and SQL
Explanation: The session layer handles functions like NFS (Network File System) and SQL (Structured Query Language).
The presentation layer is responsible for?
Correct answer:
A) Data encryption and compression
Explanation: The presentation layer translates and formats data and handles encryption and compression.
ASCII and JPEG are examples of which OSI layer?
Correct answer:
C) Presentation
Explanation: ASCII and JPEG operate at the presentation layer, formatting data for applications.
The application layer interacts with?
Correct answer:
C) User applications
Explanation: The application layer interacts directly with user applications, such as web browsers and email clients.
Examples of application layer protocols include?
Correct answer:
B) FTP, HTTP, SMTP
Explanation: FTP, HTTP, and SMTP are protocols at the application layer of the OSI model.
What is the first step in isolating a network problem?
Correct answer:
A) Check the physical connection
Explanation: The first step is to check if the physical connection to the machine is down.
A timed-out response from a ping indicates?
Correct answer:
B) Network connection is down
Explanation: A request timed-out response means the network connection is unavailable.
The function of the data link layer is to provide?
Correct answer:
A) Error-free transmission using MAC addresses
Explanation: The data link layer ensures data is transmitted without errors using MAC addresses.
What is the function of the network layer?
Correct answer:
C) Routing decisions
Explanation: The network layer is responsible for making routing decisions for data packets.
The function of the transport layer is to?
Correct answer:
A) Ensure error-free packet delivery
Explanation: The transport layer ensures the integrity of data packets during transmission.
If this exam is giving you a hard time, let us be your helping hand. Contact us, and we'll provide the assistance you need to pass and move forward.